Ubiquiti – UniFi Carrier PoE++ Adapter Holder – Power Brick Holder

* The second picture shows the brick in the holder for reference.

$12.50

If you have a 3D printer and you just want to print this holder, you can buy the STL here.

Buy STL

Feel free to copy this shortened URL and send it to others you may want to share this holder with.

Copy ⎘

Device Brand

_device_brand_

Device Model

_device_model_

Brick Model

_brick_model_

Brick Width

_width_

Brick Depth

_depth_

Brick Height

_height_

Left Flap

_left_flap_

Right Flap

_right_flap_

The dimensions quoted here are what were entered during the creation of this holder. This does not guarantee fit. Before purchasing use these quoted dimensions to measure the power brick you have and make sure this holder will work for it. If not, you can make your own holder. Also keep in mind that the holder will most likely have some tolerance although not guaranteed. The dimensions quoted here include the tolerance if it exists.

It is also worth noting that the holder height will be half the brick height that is being quoted here. That is for many reasons (saving plastic, better air flow to name a few). The second picture shows how the power brick, as defined here, will fit in the holder for reference.

For more information about the quoted dimensions, please check the page “Dimension Guide“

A blueprint of the holder has been generated as well in a printable format. If you have a regular paper printer, you can download this PDF file and print it. The blueprint is to scale, which means that you can ascertain if the brick you have will fit within the confines of the holder as it’s printed on the paper. For more information on the generated blueprints, take a look at the blueprint guide.

View Drawing

Reviews

Only logged in customers who have purchased this product may leave a review.